Battery Chargers/Power Supplies
Eaton, Cutler Hammer or Westinghouse
POWER SUPPLY SWITCHER, 24 VDC, 10 WATT OUTPUT, 100-240 VAC, 1 PH INPUT
Eaton, Cutler Hammer or Westinghouse
POWER SUPPLY SWITCHER, 24 VDC, 10 WATT OUTPUT, 380-480 VAC, 1 PH INPUT
SAB NIFE
CONTROL BUCKET
Alcad
BATTERY CHARGER/RECTIFIER INPUT AC VOLTS 120/208/240 = 48 DC VOLTS, INPUT AC AMPS 12.8/7.2/6.4 = 12 DC AMPS, INPUT 60HZ PHASE 1 = RIPPLE Mv rms 30, NICD, NUM. OF CELLS 37
Alcad
BATTERY CHARGER/RECTIFIER INPUT AC VOLTS 120/208/240 = 130 DC VOLTS, INPUT AC AMPS 32/19/16 = 16 DC AMPS, INPUT 60HZ PHASE 1 = RIPPLE Mv rms 100,BATTERY TYPE PB NUM. OF CELLS 60
DC POWER SUPPLIES, OUPUT: 24 VDC AT 4.8 AMPS, VDE TRANSFORMER CONSTRUCTION
SOLA
POWER SUPPLY MODULE 115/230VAC 50/60HZ 6.0A/2.8A DC 24V/10A
Alcad
STANDBY BATTERY INPUT AC VOLTS 120 = 120 V OUTPUT, INPUT 29.3 AMPS = 16 A OUTPUT, 60 HZ = DC, 1 PHASE, CELLS 60 L/A
SEL (Schwietzer)
COMMUNICATION PROCESSOR REMOTE ACCESS POWER SUPPLY VOLTAGE 38-200 VDC OR 85-140 VAC
SEL (Schwietzer)
Schweitzer Distribution Protection System POWER SUPPLY 48/125V 120V 50/60HZ
Banner
OMNI-BEAM AC POWER BLOCKS SUPPLY:105 TO 130VAC, 50/60HZ, 4VA LOAD OUTPUT: 500mA MAX @ 130VAC ALARM OUTPUT: 200mA MAX @ 130VAC
Condor
POWER SUPPLY INPUT: 100/120/220/230*/240 VAC 73W. MAX +10%/-13% 50/60HZ OUTPUT: 1) 5.0VSC @ 3.0A OVP @ 6.2 +-0.4V. 2) 5.0VDC 2 3.0A OVP @ 6.2+- 0.4V DERATE 10% FOR 50HZ OPERATION
Condor
POWER SUPPLY INPUT: 115/230 VAC +- 1-% 47-440HZ OUTPUT: 1) =5VDC @ 3.0 AMPS OVP @ 6.2 +- .4V 2) -5VDC @ 3.0 AMPS OVP @ 6.2 +- .4V
General Electric
POWER SUPPLY MODULE AC 200 DRIVE
Alcad
BATTERY CHARGER INPUT VOLTS: 240 AC INPUT AMPS: 5.8 HERTZ: 60 PHASE: 1 DC AMPS: 12 DC VOLTS: 48 NO. CELLS: 37 TYPE CELL: NICD INCLUDES TRANSFORMER #AB1556-00, TRANSFORMER #AP0306-00, PRINTED CIRCUIT BOARDS, CROMPTON DC VOLT METER RANGE 0-75, More...
